Honda CRF300F/250F Hagon Rear Shock - Used Take-off

Honda CRF300F/250F Hagon Adjustable Rear Shock - USED TAKE OFF UNIT

This is a shock we used for about 20 hours of ride time for testing and benchmarking during some product development.  If you are not familiar with the Hagon shocks - they are made in the UK and built from billet steel in the body and billet aluminum in the upper and lower yoke areas.  Nice quality and good performance (comparable to the Vonkat). This shock offers adjustable rebound and also adjustable spring pre-load for setting correct rider sag.  These shocks are rebuildable and serviceable - no issues there for the future...

This used/take-off shock works perfectly fine.  Fully ready to install and ride, no leaks, issues or concerns.  There is just one of these available from when we were testing, once it is gone its gone.  Sorry, no returns or refunds on this item - ALL sales are final. 

This shock is sprung for a roughly 190 to 230lb rider and has the heavier spring on it already.  If you are far below or above that weight range - then this shock is probably not for you...

Shock includes a Hagon branded pre-load tool as they come from the factory (not shown) and also the correct size allen wrench for adjusting the rebound at bottom of shock.  Be aware - there is a small setscrew that locks in the pre-load tensioning ring.  That set screw needs to be loosened before adjusting the preload if needed and then tightened again after sag has been set.

This Hagon shock fits the following Honda motorcycles:
2026+ CRF300F
2019-2025 CRF250F

Note: Our Rear Shock Lengthening Clevis is not compatible with this shock (or any other aftermarket shock). 

This shock is fully compatible with our Bremer Lightweight Billet Shock Linkage and all positions of our Corona adjustable rear suspension linkage (STD, HIGH, & LOW) positions.