Honda CRF250F Bremer Power Pulse Spark Arrestor Insert

Honda CRF250F BREMER Power Pulse Spark Arrestor Insert

This part qualifies for Free Shipping to All USA addresses!

Power to the People!!  Finally, an affordable performance exhaust upgrade specifically designed for the Honda CRF250F trail bike!  

This insert enhances the stock CRF250F power delivery.  It offers noticeably more torque and power in the low to mid rpm ranges, with also an ability to rev freer in the high rpm ranges as well. 

Designed and developed in-house and manufactured by our Bremer division in the USA!  Built using laser cut stainless steel throughout, Tig welded at all seams and joints, with a spark arrestor spec mesh for best and safest exhaust flow.

Lighter than stock by 1/3 pound.  Hand-crafted locally here in Vermont, with laser engraved logos as well.

For folks looking for an affordable exhaust upgrade that gives the very best low to mid-range torque of any exhaust - this is your solution.  We have been running these inserts for a full season with amazing results.  Excellent for technical trail riding, play riding, hard enduro, single track - anywhere you need tractable power, this is the solution.

In the grand scheme of things - there are 3 exhaust options for the 250F:
1 - Stock exhaust, which is quite restrictive, but also very quiet.
2 - Full race exhaust - Viola, Belparts, etc - amazing power, but the power is mainly focused on the upper-mid to high-rpm range with a very quick rev response.  Very loud and not the best solution for technical enduro riding.  Excellent for motocross, sand, or folks looking for maximum power though.
3 - This Bremer stock muffler insert.  Noise volume is roughly halfway between an open full race exhaust and the stock muffler insert.  Similar to stock noise output at idle, nice throaty performance tone on the throttle, louder than stock for sure, but not obnoxious.  Better throttle response from idle, more useable power and torque in the low to mid-range rpms - with no sacrifices elsewhere.  A slightly slower rev response (than a full open race exhaust) for better traction in slippery and hard terrain.  This is our in-house go-to exhaust for sure!

Amazing performance value, super-high build quality, made in the USA, plus a built-in spark arrestor - what's not to like?

This Bremer exhaust insert is guaranteed to fit the OEM Honda stock CRF250F muffler for all model years, 2019 thru to Present.  No electronic injection tuner is needed.

Although not required but do we do recommend running our Performance Intake Kit with this Bremer insert to realize the maximum performance gains possible.

Installation is very simple - remove the 3 bolts holding your stock end cap and remove it along with your stock insert and gasket.  Install the Bremer insert (while reusing the large OEM Honda gasket) with the small arrow facing up.  Reinstall the stock end cap bezel and 3 bolts.  Then Boom!  Instant horsepower!

Note - This product has not yet been USFS approved, but functions in every way like a spark arrestor would.